JAGUAR 880-840

JAGUAR 880-840

The JAGUAR 800 Series delivers value and performance for producers and custom harvesters alike!

JAGUAR 880-840

JAGUAR 880-840

The JAGUAR 800 Series delivers value and performance for producers and custom harvesters alike!

Precise and power-saving. V-CLASSIC knife drum.

JAGUAR 880-840

Chevron-shaped knife layout.

The effectiveness of the 29.5 in (750 mm) wide chopping drum in the JAGUAR is unique. The chevron-shaped knife arrangement produces a pull-through, guillotine cut with a minimum of effort. At the same time, the forage is guided towards the middle – this reduces wear and friction losses on the sides of the drum housing.

  • Robust design
  • Minimum power requirement
  • High throughput
  • Top chop quality
  • Excellent discharge
JAGUAR 880-840

The V-CLASSIC knife drum is available in three versions:

  1. V20 for use in coarse forage or for use primarily in grass
  2. V24 for use in grass and corn; suitable for longer chop lengths in grass (optional through parts)
  3. V28 for use in grass and corn; suitable for short chop lengths in corn (optional through parts)

The chop length can be doubled by equipping the V-CLASSIC cylinder with half-knives. The half-knives enable a very consistent crop throughput which is ideal when harvesting grass or maize for long chopping and SHREDLAGE®.

CylinderApplicationKnife set - fullKnife set - halfHalf-knives
V-CLASSIC 20Knife set20 = 2 x 1010 = 2 x 520 = 2 x 10
Chop length5 / 6.5 / 8.5 / 11 / 17 / 2110 / 13 / 17 / 22 / 34 / 4210 / 13 / 17 / 22 / 34 / 42

Adjustable drum concave plate.

The smooth floor in the chopping housing is standard on the JAGUAR. In order to achieve a consistent crop flow even when the knives have not been reset, it is possible to make a quick adjustment using spacer discs. This ensures the smallest-possible clearance to the knife drum.

Thanks to the excellent accessibility, you can quickly refit the JAGUAR:

  • With a four-slot insert for late corn harvesting
  • With a friction concave plate for earlage
JAGUAR 880-840

Fully automatic sharpening.

A precision chop and consistent chop quality are possible only if the blades are absolutely sharp. The sharpening of the knives is controlled from the cab.

As an option, you can also control the shear-bar setting from the cab. The shear bar doesn’t need to be loosened for this operation; instead, the mounting block is pivoted and moves gently towards the knife drum with the shear bar firmly fixed on top. Knock sensors register contact and set the shear bar accordingly.

Sharpening and adjustment of the shear bar should be carried out on the basis of the throughput quantity rather than at a given time of day. CEBIS can be configured to give a reminder when knife sharpening is required.